knives_03

Model 1 – All Purpose Fighting Knife

This is the knife made famous by Allied combat troops in World War II and since widely used in all theaters of war. Blade made from 1/4” stock. Top cutting... View Knife
model-2Ethumb

Model 2 – Fighting Stiletto

1/4" stock.   This is a heavily made dagger or dirk. 4 3/4" - 5" leather handle is shaped along lines of famous British Commando knife but is larger, stronger... View Knife
model-2-5inchthumb

Model 2 – Letter Opener

3/16" stock.   Similar to fighting stiletto but lighter and smaller throughout. (Model #2 – 4" - see Non-Catalog knives) (Also see Model... View Knife
model-3Ethumb

Model 3 – Hunter

1/4"  stock.    An ideal all-around, heavy-duty sportsman's knife. Scientifically designed for every outdoor use and our most popular sporting... View Knife
model-4Ethumb

Model 4 – Big Game and Skinner

1/4"  stock.    Similar to Model 3 but with a more curved blade. This knife has been extensively used by Alaskan and Canadian guides, trappers, and... View Knife
model-4SMthumb

Model 4 – Small Game and Skinner

3/16"  stock.    4 1/4"-5/8" leather handle, brass hilt, duralumin butt cap. Lighter weight than the larger Model 4. Similar to Model 3, but with more... View Knife
model-5Ethumb

Model 5 – Camp and Trail Knife

1/4" stock.  This is a straight-bladed knife preferred by many for all-around camp and trail use. Also ideal for yachtsmen and sailors for general boating... View Knife
model-5SMthumb

Model 5 – Small Camp and Trail

4" blade of 3/16" stock.   4 3/8" – 5/8" stag handle. (Not available with leather handle.) Brass hilt. Suitable for small camping... View Knife
model-6altthumb

Model 6 – All Purpose Carving Set

Designed to meet every requirement as the ideal table knife, it is rustproof and will resist staining as ordinary blades do when used in carving meat. Please... View Knife
model-7SM

Model 7 – Fisherman – Hunter

Brass hilt. Duralumin butt cap. Similar to Model 3 except this knife is smaller and lighter. Ideal for small game, creel or tackle... View Knife
model-8Ethumb

Model 8 – Trout and Bird Knife

4" blade of 3/16" stock.  Top cutting edge sharpened approximately 2 inches. 4 3/8"-5/8" stag handle. Brass hilt. Especially suitable for small fish and... View Knife
model-9SM

Model 9 – Pro Thrower

Solid one piece construction from 1/4" stock. Accurate, balanced, and scientifically designed for those desiring a practically indestructible throwing... View Knife
model-10SM

Model 10 – Salt Fisherman & Household Utility

1/8" stainless steel stock.  Rust-resistant. Holds the keenest edge. Blade not forged, but is fully hand-ground from high carbon stainless steel. 4 5/8" Black... View Knife
model-11Ethumb

Model 11 – Alaskan Skinner

Brass hilt. Duralumin butt cap. The original drop-point blade. Designed by Tommy Thompson, noted Alaskan guide, in 1952 for big-game skinning, with point... View Knife
model-12E-bearthumb

Model 12 – Bear Bowie

8" blade of 1/4" stock.  Top cutting edge sharpened (approx. 5 ¼”). Brass double hilt, with forward curve. Duralumin butt cap. Designed on special order... View Knife
model-12-little_bear-SM

Model 12 – Little Bear Bowie

6" blade of 1/4" stock. Top cutting edge sharpened. 4 5/8" (approximate) leather handle. Brass single hilt. Duralumin butt cap. Top of blade in front of hilt... View Knife
model-12E-sptmnthumb

Model 12 – Sportsman Bowie

9" blade of 1/4" stock.  Top cutting edge sharpened. 5" (approximate) leather handle. Brass lugged hilt. Duralumin butt cap. Made to meet the demand for a... View Knife
model-12E-6insptmnthumb

Model 12 – 6″ Sportsman Bowie

1/4" stock. Top cutting edge sharpened. 4 1/2"-3/4" leather handle. Brass single hilt. Duralumin butt cap. A smaller Bowie-type knife for sporting... View Knife
model-12E-smiththumb

Model 12 – Smithsonian Bowie

11" blade of 3/8" stock, Top cutting edge sharpened (approx. 4 ¾”). 5 1/4" (approximate) leather handle. Brass lugged hilt. Duralumin butt cap. A replica of... View Knife
model-12-thorpe-SM

Model 12 – Raymond Thorpe Bowie

13" blade, Top cutting edge sharpened (approx. 5 ¾”). Leather handle approximately 5 1/4". Brass lugged hilt. Duralumin butt cap. Modeled after design... View Knife
model-12E-confedthumb

Model 12 – Confederate Bowie

11" blade of 1/4" stock.  This knife is similar to types used by Confederate... View Knife
model-13SM

Model 13 – Arkansas Toothpick

12" blade of 1/4" stock.  A replica of the historic stiletto-dagger famous in Confederate... View Knife
model-13E-6inthumba

Model 13 – Small Arkansas Toothpick

Similar to Arkansas Toothpick but smaller and lighter throughout. 6" blade of 1/4" stock.   Comes with hilt as shown on Model 2. For desk or concealed weapon... View Knife
model-14SM

Model 14 – Attack

7 1/2" blade of 1/4" stock.  Green micarta handle material available upon request. Stainless steel blade, sawteeth, forward curved hilt, nickel silver hilt,... View Knife
model-15Ethumb

Model 15 – Airman

Top cutting edge sharpened. 4 1/2" Black Micarta handle. Stainless steel blade, sawteeth, forward curved hilt, nickel silver hilt, name etching, name plate are... View Knife
model-16Ethumb

Model 16 – Diver

Top cutting edge sharpened. 4 1/2" Black Micarta handle, similar to model 14 and 15. (Green micarta handle material available upon request.) Brass hilt, single... View Knife
model-16sp1SM

Model #16 SP1 Fighter

7" blade of 1/4" stainless steel stock. Top cutting edge sharpened approx. 3". Brass double hilt. 4 1/2" handle of durable Black or Green Micarta. Extra heavy... View Knife
model-17SM

Model 17 – Astro

4 3/8” Black micarta handle, fastened with removable stainless steel bolts. A slot in the heavy tang and matching hollow inside the handle may be used to... View Knife
model-18SM

Model 18 – Attack Survival

Sawtooth edge on top. (sawteeth not offset) Approx. 4 3/4" stainless steel tubular handle, 1" diameter, silver soldered to 1/4" oblong brass hilt, fitted with... View Knife
model-19Ethumb

Model 19 – Bushmaster

Top cutting edge sharpened approximately 2-1/2". 4-1/4"-5/8" leather handle. Brass hilt. Duralumin butt cap. Designed by a professional woodsman for... View Knife
model-20Ethumb

Model 20 – Yukon Skinner

Brass hilt and Duralumin butt cap are standard. An adaptation of our Model 4 especially designed for big game purposes by Ward Gay, famous Alskan bush pilot.... View Knife
model-21Ethumb

Model 21 – Little Game

4"-4 1/4" genuine imported stag handle. Brass hilt. Especially suited for caping and other delicate cutting duties. Top of blade in front of hilt notched for... View Knife
model-22Ethumb

Model 22 – Outdoorsman

Nickel silver hilt. Duralumin "crow's beak" butt cap. A thinly-beveled blade for the professional outdoorsman. Top of blade in front of hilt notched for thumb... View Knife
model-23Ethumb

Model 23 – Gamemaster

Top cutting edge sharpened approximately 2 1/2". 4 1/2"-5/8" leather handle. Brass hilt. Duralumin butt cap. A variation of Model 19, serving the same... View Knife
model-24SM

Model 24 – Guardian

Blade sharpened 3" with 1" of thumb notches. 3 3/4" Micarta handle, 3/4" thick. Micarta handle available, in black, maroon,  or green (please specify).... View Knife
model-25E2thumb

Model 25 – Trapper

Thumb notch and top of hilt molded for thumb placement. Nickel silver hilt. Duralumin butt cap; Brass available upon request. Standard with natural stag. (Name... View Knife
model-26Ethumb

Model 26 – Pathfinder

Excellent skinning and outdoors knife with drop point blade. Cover sheath... View Knife
model-27Ethumb

Model 27 – Trailblazer

New 13-spacer configuration includes red micarta sections. Stag handle. Brass 1/16" plate. An ideal all-around heavy-duty sportsman's knife. Options... View Knife
model-27SMmini

Model 27 – Mini Trailblazer

#27 mini blade is 3/16" stainless steel stock with 3 1/2" blade length. Handle length approximately 3 3/8". Configured with #27 Trailblazer handle only.... View Knife
model-28SM

Model 28 – Woodsman

Drop point hunter blade. Full tang handle construction. 4 1/4" handle length. Single brass hilt. Green micarta handle material (black micarta available).... View Knife
Top of Page
75 years