Our hand-crafted sheaths – shaped to fit each model – are made of the finest oil-tanned saddle leather, heavily stitched, with a three-ply stitch-protecting spline of leather around the sides and with a 2 3/4″- 3″ belt loop. The knifepoint cannot pierce the stitching. A pocket hone is supplied with each sheath. Sheaths for small or narrow-bladed knives will not accommodate a hone pocket.
A. Model A– Supplied with Models 1, 2, 3, 4-5″ and longer, 5- 5″ and longer, 11, 12-6″, 16-7″ SP#1, 19, 20, 22, 23, 25-6″ and 27. With hone in the pocket. Sheath supplied with Models 12 and 13 similar, but larger, with hone in pocket. (Please Note: On 4 1/2″ and 5″ sheaths, the keeper strap snaps around the handle because there isn’t enough room above the hone pocket for a diagonal strap.)
B. Model B – Supplied with Models 2-5″, 4-4 1/2″, 5-4″, 7, 8, 9 (extra cost), 10, 13-6″, 21 and 28. With hone stone with the knife.
C. Model C – Supplied with Models 14, 15, 17, and 18. Specially designed under the auspices of the U.S. Marine Corps for these knives. With hone in the pocket. Fitted with tie-down thongs (5 1/2″ ‘C’ sheath has single stitch and 7 1/2″ ‘C’ sheath has double stitching). Note (not shown) The Model 16-7″ Diver’s Knife’s sheath is similar, waxed, and has no hone pocket.
D. Cover Sheath– Supplied with Model 26
E. Cover Sheath – Supplied with Model #10-5″ and Model #10-3″.
F. Cover Sheath – Supplied with Model #25-5″.
G. Concealment Sheath – Supplied with Model #24-4″.
Not Shown
“Left-Handed Sheaths” – Sheaths supplied with straight-bladed knives (Models 2, 13, 14, 15, 17, and 18) may be used either right or left-handed. For other models, we can have left-handed sheaths specially made.
“Black Sheaths” – Black dyed sheaths are available on most models for an additional charge.
“Waxed Impregnated Sheaths” – Waxed sheaths are available on most models for an additional charge.
